Polishing discs
cloth, flap, sisal, grinding, wiping pads and polishing compounds

Micron PLUS Inc.
currently belongs among the foremost polishing disc manufacture specialists. Thanks to expediency, quality and reasonable prices our company is one of the main suppliers in the polishing supplies field.

Let it pass with MICRON PLUS

Alloy wheel-polishing kit

Our kit helps you achieve a perfect polish on the wheels made of light alloys, and all this with minimal effort.

  1. Removal of rough surface imperfections and surface damage.
    a) Sanding wheel with shank Ø60x30, Ø80x30 or with arbor Ø150-160, thickness of 25 to 30 mm, recommended grit 240-320.
    b) Layered disc of abrasive fleece (Scotch-Brite) Ø60x30 shank, or Ø80x30 arbor Ø140-175 thickness of 25 to 30 mm, recommended grain 180-320.
  2. Brushing
    Polishing disc SISAL Ø130-160 using abrasive compound 320 (grey-brown).
  3. Prepolishing
    Cloth wheel KALIKO Ø130-160 using abrasive compound BIANCA TSS (white), GAMMA 76 (light green)
  4. Final polishing - high gloss
    Cloth wheel MOLINO RETEX Ø130-160 using polishing compound ORION 90 (white), ALFA 535 (white)

PRICE LISTS

Small kit for polishing wheels

Is set, around 4-5 standard polished wheels.

  • Lamella grinding wheel with shank (sanding fleece)
  • Ø60mm x 30mm x thickness of the shank Ø6mm A320
  • Ø80mm x 50mm x thickness of the shank Ø6mm A180
  • Polishing wheel SISAL Ø150mm x 20mm x thickness of 8 mm hole
  • Polishing wheel Kaliko Ø150mm x 20mm x thickness of 8 mm hole
  • Polishing wheel MOLINO Ø150mm x 20mm x thickness of 8 mm hole
  • Abrasive paste zr. 320 (dun) - 0.7 kg
  • Buffing Compound BIANCA TSS (white) - 0,5 kg or GAMMA 76 (light green) - 0,5 kg
  • ORION Buffing Compound 90 (white) - 0,5 kg or ALFA 535 (white) - 0,5 kg

Great kit for polishing wheels

Set a great fit for more damaged surface and larger diameters al. Is set, around 4-5 standard polished wheels.

  • Grinding wheel with clamping plate hole (sanding fleece) Ø150mm x 25mm x thickness of the clamping hole Ø10mm P180
  • Lamella grinding wheel with shank (sanding fleece) Ø60mm x 30mm x thickness of the shank Ø6mm A320
  • Lamella grinding wheel with shank (emery) Ø80mm x 30mm x thickness of the shank Ø6mm P320
  • Polishing wheel SISAL Ø180mm x 20mm x thickness of 8 mm hole
  • Polishing wheel Kaliko Ø180mm x 20mm x thickness of 8 mm hole
  • Polishing wheel Kaliko Ø180mm x 10mm x thickness of 8 mm hole
  • Polishing wheel MOLINO Ø180mm x 20mm x thickness of 8 mm hole
  • Abrasive paste zr. 320 (dun) - 0.7 kg
  • Buffing Compound BIANCA TSS (white) - 0,5 kg or GAMMA 76 (sv.zelená) - 0,5 kg
  • ORION Buffing Compound 90 (white) - 0,5 kg or ALFA 535 (white) - 0,5 kg

Polishing plan

  • Polishing cloth wheels are attached with bolt and washer to a shank to be used in hand drills or other suitable tools.
  • Recommended speed is 2200 - 3500 rpm.
  • Polishing disc must be before the first use evened out. The rotating disc is pressed against a sharp object, possibly a steel brush, which brushes out the surface of the disc and removes the initial fibers.
  • Application of polishing compounds on the disc - polishing paste is fastened (secured against movement) and the rotating disc is pressed against it so that the compound is applied to its perimeter. The compound is applied to the disc at regular intervals so that the polishing disc is not dry. (Do not polish with dry disc).
  • For different operations (prepolishing - polishing - high gloss) always use separate disc. Do not mix various types of compound on one disc.
  • Used compounds have the ability preserve your polished surface for some time.
  • Do not degrease finished surface. Do not use solvents; only wipe off excess compound with cotton cloth. It is best if done while the polished surface is still warm.